New Holland Electronic Service Tool Download:

https://mega.nz/#F!WVghzKwY!anc22uzd2t41QLiGgAt88Q

New Holland Electronic Service Tools DESCRIPTION

Electronic Service Tool (EST) Engineering Level* (software only) – used by New Holland dealer technicians to connect with vehicles that have a Controller Area Network (CAN) BUS.

Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.

OS: VISTA,Win 8 x32 x 64, Win7 x32 x64, WinXP

With this service tool you can:

Check status of parameters;
Retrieve faults;
Run diagnostic tests;
Make ECU and parameter programming;
Monitor active and logged diagnostics;
View and change ECU configuration;
View diagnostic procedures and schematics.
Troubleshoot problems;
Use asist database;
Run scope diagnostics.

New Holland Electronic Service Tool Supported Brands:

New Holland (Agriculture and Construction);

New Holland FK (Fi at-Kobelco);

New Holland O&K (Orenstein & Koppel);

CASE (Agriculture and Construction);

STEYR;

KOBE-LCO;

Iveco (Astra) (articulated dump trucks only);

Flexi-Coil;

Sumitomo (S.H.I.)

Top 8 Reasons to Get NEXIQ-2 USB Link :

1. Support system: XP and windows 7 (Volvo Hino Perkins Cat Nissan software must be used on xp system, orther software can

be used on win 7 32bit)

2. It Works As Great As Nexiq.

3. Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.

4. Reduce reprogramming times with direct USB connection.

5. Mixed fleet capabilities with broad protocol support.

6. Quick access to vehicle data for maintenance or management reports.

7. Quickly attaches to vehicle’s diagnostic connector.

8. Easy portability increases flexibility, May be used with desktop PC or laptop.

NEXIQ-2 USB Link Packed Software and Application：

– Allison (Included!)

– Bendix 6.3.8.0 (Included!)

– Detroit Diesel DDDL 7.05 ((Included!)

– Detroit Diesel DDCT (Included!)

– Detroit Diesel Calibration Tool (Included!)

– Eaton Service Ranger 3.2 (Included!)

– International DLB (Included!)

– International ICAP, IPTS, NETS, IPC (Included!)

– International Master Diagnostic (Incluided!)

– Meritor and Wabco Diagnostics (Included!)

– Cummins Insite 7.5 (Included!)

– Hino 2.0.2. (Included!)

– Caterpillar 2.0.1.0 (Included!)

– Perkins EST 2010B (Included!)

– V Macks 2.6.12 (Included!)

– V Macks Dealer Pro (Included!)

– Volvo VCADS 2.35.10 (Included!)

– Toyota Techstream for car (Included!)

Piwis tester 2 a professional  diagnositc tool for Porsche vehicles before 2017. We received feedback from customers that porsche piwis tester 2 software prompted error message”tester is not imprinted” can not go on to do diganosis, or page suck at “loading ODX Data” page, see below images

How To Solve Piwis Tester 2 Is Not Imprinted?

Solution: Software need te be activated, contact software seller to activate the software.
Piwis Tester II Software Stuck At “Loading ODX Data”

Soultion:  Change date of laptop to year 2010

if you met below issue during using porsche piwis 3 , use the same method, change the date of laptop to 2010.

Issue: device conneceted to vehicle, but software can not see the device

Solution: Change date of laptop to year 2010

Porsche Piwis Tester II  Software free downlaod

Project Piwis 3 PT3G => VAS6154-Kolun a look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154

Note: please be careful and do it on your own risk.
Autonumen.com will not give support

Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154

VERY IMPORTANT:

For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3 with relief!

Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche

Diagnostic test: passed

Coding: passed

Programming: passed

attached VAS 6154 driver download, installation instruction, wlan setup….

Make the connection easier and even better than ever.

The Nexiq 124032 USB-Link 2, the next generation vehicle interface from NEXIQ Technologies, has arrived. Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels.

The Nexiq 124032 USB-Link 2 also includes a new Bluetooth* module with an enhanced data rate to support wireless communication (500 b/s J1939). For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications.

The Nexiq USB-Link 2 comes with the following:
Latching USB Cable (Part # 404032)
6 and 9 pin Deutsch Adapter (Part # 493148)
storage case

Usability
Class 1 Bluetooth provides up to 100 feet of wireless freedom.
Flexible configuration supports wired or wireless connectivity.
Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.
Reduce reprogramming times with direct USB connection.
Mixed fleet capabilities with broad protocol support.
Quick access to vehicle data for maintenance or management reports.
Quickly attaches to vehicle’s diagnostic connector.
No messy cables to untangle or get in the way with Bluetooth.
Easy portability increases flexibility.
May be used with desktop PC or laptop.

Make the connection easier and even better than ever.

The Nexiq 124032 USB-Link 2, the next generation vehicle interface from NEXIQ Technologies, has arrived. Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels.

The Nexiq 124032 USB-Link 2 also includes a new Bluetooth* module with an enhanced data rate to support wireless communication (500 b/s J1939). For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications.

The Nexiq USB-Link 2 comes with the following:
Latching USB Cable (Part # 404032)
6 and 9 pin Deutsch Adapter (Part # 493148)
storage case

Usability
Class 1 Bluetooth provides up to 100 feet of wireless freedom.
Flexible configuration supports wired or wireless connectivity.
Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.
Reduce reprogramming times with direct USB connection.
Mixed fleet capabilities with broad protocol support.
Quick access to vehicle data for maintenance or management reports.
Quickly attaches to vehicle’s diagnostic connector.
No messy cables to untangle or get in the way with Bluetooth.
Easy portability increases flexibility.
May be used with desktop PC or laptop.

PIWIS TESTER II V12.8 Free Download and Upgrade Steps

PIWIS TESTER II V12.8 Free Download and Upgrade Steps, if you want to buy this item, please click this link.

We released the Piwis Tester II v12.8 for Porsche which is able to work with the latest models till 2014 year.

This new version Piwis tester ii added new database for wiring diagram system as well as the trouble codes. Users are very easy to operate when using this software.

The Piwis Tester II v12.8 is the version for Porsche 2013-12, you and also upgrade your software by using the upgrade software DVD. You can download the PIWISER TESTER II Upgrade software by this link.

How to upgrade Piwis Tester II software?

Put the Upgrade DVD into your DVD Rom.
Choose Tools- software upgrade
Then the software will be install automatically

The total process of upgrading will cost around 40 mins or so, please make sure your laptop Panasonic CF-30 with power supply and never shut off during upgrading. If your software is V12.1 or lower, we strongly suggest you upgrade the version one by one. (e.g. Your software is V11.7, you gonna upgrade to v12.1 then upgrade to 12.4, then 12.8)

Below are some screen shots of the Piwis tester II V12.8

Notice:

This upgrade will not effect the 90 days expiration solution, and you DO NOT NEED Connect to internet to verify the software after the upgrade installation finished! If you still have any questions about the upgrading, please kindly contact with our online customer service.

Good luck!

ALLDATA 10.53 Full Set Q3 2013 Automotive Repair Data +Mitchell Ondemand 5.8.2 10/2013 Version is available in autonumen.com.
ALLDATA 10.53 auto repair software, the leading computer-based diagnostic, repair and estimating information system, can help you boost shop performance and build customer loyalty as you efficiently repair more makes and reduce comebacks.

Software version: alldata 10.53 crack version & OnDemand5 v5.8.2.35
Software capacity: 750GB

Operating system: all the software runs on Windows xp. Win7 and Win8. But some software only works on (32-bit system. It can not run on 64-bit system. Please work better on the 32-bit system.

ALLDATA Function:

Professional repair shops need current, factory-correct information to meet the complex repair demands of today’s automotive industry.
ALLDATA 10.53 shops have fast access to the industry’s best information for vehicles from 1982 to present including TSBs, maintenance schedules, manufacturer recall information, OE solutions, and factory images and diagrams.
The most comprehensive information for 1982 to present vehicles.
OEM images, diagrams and diagnostic flow charts
Parts and labor information Maintenance schedules
Manufacturer TSBs and Recalls
Integrated estimating software
OEM wiring diagrams with connector, ground, power distribution and splice information
A2Z Component Search – the fastest route available to component information

Whether you measure productivity by the number of vehicles repaired in a day, the variety of vehicles you’re able to work on, or the time spent on diagnosis and repair, using the right information and shop management tools is vital to the success of your business. ALLDATA can help you succeed in every way.
Automotive repair shops that use the ALLDATA system have a clear differentiation from other repair facilities. ALLDATA-equipped shops can provide their customers with the most accurate repair estimates and proof of diagnostic and repair procedures.

ALLDATA also includes factory-correct maintenance schedules that itemize additionally needed services. Moreover,ALLDATAhelps shops build consumer confidence and loyalty.

Nexiq 2 truck diagnostic tool sometimes called XTruck-2 USB Link,  It is the newest heavy duty scanner in the market,  it is support more heavy duty  models than nexiq usb link ,  you can check the  nexiq usb link 2 support models  as following:

1. For VOLVO TRUCK: FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC, WG, WI, FH565, NH12, FL6, FL7, FL10, FL12, NH525, WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12 , F16, NL10, NL12,VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R, OLYMPIAN, SUPEROLY

2. For  VOLVO BUS: B12B,B12M,B12R,B6R,B7L,B7R,B9L,B9R,B9S,B9TL,PREVH,PREVX,

3. For  MACK TRUCKS: V-MAC I, V-MAC II, V-MAC III, V-MAC IV, Service Diagnostic

4. For  VOLVO CONSTRUCTION EQUIPMENT (CE):
Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E, L180F, L220E, L220F, L330E, L350F, L60E, L60F, L70E, L70F, L90E, L90F
Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E, T450D,
Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C, EC210B, EC210C, EC235C, EC240B, EC240C, EC290B, EC290C, EC330B, EC330C, EC360B,EC360C, EC460B, EC460C, EC700C, EC700B, EC700C, ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B, EW160C, EW180B, EW180C, EW200B,EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611
Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930, G940, G946, G960 , G970, G976, G990

5. For  Navistar: ALL Diamond Logic Builder (DLB) ServiceMaxx

6. For  International: ALL Intune, MD32,

7. For  Freightliner: ALLServiceLink:cascadia,century,columbia,Coronado,classic,FLDSD,4900FA, 4900SA,4900EX.

8. For  HINO:ENGINE:
300SERIES, 500 SERIES, CR03_J08E, CR03_J05D, COMMONRAIL(J05E), J05D_US, J08E_US,P11C,VCS, Hibrid, Inverter, Brake(ABS), AT_45043LE

9. For  ISUZU_GMC:
1996-1999 NPR Diesel and F Series Include NPR/W 3500, NPR HD/W 4500, This is for 6.0L V-8 Gasoline Engines only, 7.8L 6HK1 Engine
Isuzu: NPR, NPR HD, NQR, NRR, FTR, FVR, FXR with 6HK1 LG4 Engine, NPR, NPR HD,NQR, NRR with 5.2L (4HK1) or 3.0L (4JJ1) Diesel engine. 6.0L V-8 Gasoline Engine
GM: W3500, W4500, W5500, WT5500, W5500 HD,with 5.2L Diesel Engine Only,T6500,T7500, T8500

10. For  SCANIA VEHICLE, KOMATSU excavator, and MAN vehicle will be updated.

by the way, the nexiq usb link 2 can work on  XP and windows 7 computer system. it is easy to install the software.

XTruck-2 USB Link + Software Diesel Truck Interface And Software With All Installers

General Motors Factory Scan Tools

GM MDI 2 and GM MDI: This newest release GM factory scan tool begins it’s coverage in model year 2010. MDI when combined with the Global Diagnostic System 2 (GDS2) software application allows servicing of GM’s new Global Architecure Platform (Global A) vehicles. Model coverage currently includes 2010-2013 Buick LaCrosse, 2010-2013 Cadillac SRX, 2010-2013 Chevrolet Camaro, 2010-2013 Equinox, 2011-2013 Chevrolet Volt, 2011-2013 Chevrolet Cruze, 2010-2013 GMC Terrain and 2011 Buick Regal. By model year 2014 virtually all GM vehicles are serviced by using the MDI/GDS application. For all other 2010-2013 GM vehicles you will need either a GM Tech-2 or the optional ‘Tech-2 Emulator’ program to achieve OEM level functionality. The ‘Tech-2 Emulator’ uses the MDI interface device as the communications interface between pc and vehicle.

The GM MDI 2 and GM MDI when coupled up with the software application ‘GDS-2’ allows your shop to be ‘dealer level’ capable on all the above listed GM cars. Scan, pull codes, graph data and have all bi-directional controls available for all vehicle systems including Powertrain, Body, Chassis and Network. This tool will also allow you to re-program controllers as long as you have internet access on the laptop your MDI/GDS application is installed on.

GM MDI 2 Diagnostic Tool Multiple Diagnostic Interface V2020.09 GM Scanner

GM MDI Scan Tool Multiple Diagnostic Interface V2020.09

GM Tech 2: This is the GM factory scan tool used in all GM dealers since 1996. Model coverage includes all makes and models of GM vehicles including passenger cars, trucks and vans. Model year coverage is from 1992 to 2013. For GM vehicles prior to 1992 you will need a Tech1A or a MasterTech listed below to achieve OEM level functionality.

The GM Tech2 will allow your shop to be to ‘dealer level’ capable on all covered GM cars. Scan, pull codes, graph data and have all bi-directional controls available for all vehicle systems including Powertrain, Body, Chassis and Network. This tool will also allow you to re-program controllers with the optional TIS-2-Web program.

GM Tech2 GM Scanner Works For GM/SAAB/OPEL/SUZUKI/ISUZU/Holden

Tech1A: This was the factory scanner for all GM dealers from 1983 to 1995. It is still available, but in limited quantities. The Tech1A can be a solution for restoration speciality shops working on older GM products such as Corvettes or for the private car collector.